• Made in Germany
• Excellent for cutting stainless steel and other tough metals
• Thin cutting wheels for precision cuts
• Type 1 or Type 27
• Contamination free

• Used for cutting steel and and stainless steel
• Thin cutting wheels for precision cuts
• Type1
• German Engineering

• NEW & IMPROVED
• Used for cutting metal, steel, and stainless steel
• Thin cutting wheels for precision cuts
• Type1
• 4.5" = 13,300 Max RPM
• 5" = 12,000 Max RPM
• 6" = 10,200 Max RPM
• 7" = 8,600 Max RPM
• *Made in USA*
  

• Used for cutting metal, steel, and stainless steel (S/SS)
• Thin cutting wheels for precision cuts
• Type1 or Type 27
• Plastic container holds 25 cut off wheels/protects wheels from damage and moisture

• High quality and performance coupled with cost efficiency
• 2": 30,000 RPM
• 3": 25,000 RPM
• 4.5": 18,000 RPM
• 6": 14,200 RPM
• *Made in USA*

• Used for cutting iron, steel, welds, etc
• Formulated to be fastest, longest lasting thin wheel
• Exceptional performance
• Burr free cutting
• Type1 and Type 27
• Made in USA

• Used for cutting pipe, tubing, rod and sheet metal
• Can be used on all types of steel
• Extremely fast cutting
• Thin profile produces less of an exit burr
• Longer life
• Type1 and Type 27
• Made in USA

• Single solution for cutting steel and stainless steel (S/SS)
• Reduced cutting time
• Increased economic efficiency due to long tool life
• Type1 or Type 27
• Made in Germany

• Used for cutting metal, steel, and stainless steel (S/SS)
• Thinner, faster cutting with minimal burr formation
• Highest possible productivity
• Focus on speed, comfort and cutting quality
• Type1 or Type 27
• Made in Germany

• Premium performance wheel designed to be affordable for everyday use
• Featuring 3M Precision-Shaped Grain Technology
• Material: Ceramic
• Cool, fast, smooth cutting action
• Fewer wheel changes help improve costs and productivity
• 4.5" x .040" x 7/8" - Type 1 / 13,300 Max RPM
• 4.5" x .045" x 7/8" - Type 27 / 13,300 Max RPM
• 6" x .045" x 7/8" - Type 1 / 10,200 Max RPM
• 6" x .045" x 7/8" - Type 27 / 10,200 Max RPM

• Material: Ceramic Grain
• Re-engineered precision-shaped grain engineered to cut faster than competitive ceramic products
• Enhanced Speed - Delivers up to 10% increase cut rate compared to 3M Cubitron ll
• Reduces time and pressure to get the job done
• Fewer Changeovers - Removes up to 3x more material compared to 3M Cubitron ll
• Creates perpendicular cuts using the outer edge of the wheel, making them ideal for cutting through metal, including stainless steel
• Increased wheel life and productivity
• 4.5" x .045" x 7/8" - Type 1 / 13,300 Max RPM
• 6" x .045" x 7/8" - Type 1 / 10,200 Max RPM

• Made in Germany
• Long life and aggressive cutting
• Used for cutting aluminum, soft non-ferrous metals, copper, brass, bronze
• Type1
• Plastic container holds 25 cut off wheels/protects wheels from damage and moisture

• Made in USA
• Used for cutting aluminum, soft non-ferrous metals, copper, brass, bronze
• RPM: 4.5" - 13,300
• RPM: 6" - 10,200
• Type 1

• Made in Germany
• Proprietary high performance grain
• Exceptional cutting speed and long life
• Used for cutting metal, steel, and stainless steel
• 4.5": Max RPM = 13,300
• 5": Max RPM = 12.200
• 6": Max RPM = 10,200
• 7": Max RPM = 8,500
• Type1 or Type 27
• Plastic container holds 25 cut off wheels/protects wheels from damage and moisture

• Used for cutting metal, steel, and stainless steel
• Thin cutting wheels for precision cuts
• 3" - Available arbors: 3/8" and 1/4"
• 4" - Available arbors: 3/8"
• Type 1
• Blade thickness: .040"
• *Made in USA*
  

• A thinner blade for precision cuts
• Internally reinforced
• Especially designed for low horsepower portable saws
• Quality and high performance are coupled for cost efficiency

• Titanium carbide for extra long life
• Minimal vibration
• Triple chip design for added durability
• Designed to be used on a variety of ferrous and non-ferrous metals
• Cuts clean and cool
• Can be resharpened
• Max RPM = 1,500
• Number of Teeth = 80

Arbors for small cut off wheels with 1/8" hole.  The 1/4" Shank fits inside a die grinder collet and the screw that attaches the cut off wheel is 1/8" dia.